Electrical planning for North Shore renovations and new builds
From the first electrical plan to pre-wire and final fit-off, we help create homes that work beautifully with lighting, power and technology planned around the way you'll actually live.
Working alongside homeowners, builders and other trades across Auckland's North Shore.
Overview
What does a renovation and new build electrician do?
Renovation and new build electrical work runs from the first electrical plan through pre-wire to final fit-off, covering lighting, power, data, outdoor areas and EV charging. Electrical Plus does this for homeowners and builders across Auckland's North Shore, led by an EWRB registered electrician with over 30 years' experience.
- Stages we cover
- Plan, pre-wire, final fit-off
- We work with
- Homeowners, builders, architects and project managers
- Quote turnaround
- 24 to 48 hours
- Certification
- CoC/ESC on completion
- Warranty
- Lifetime workmanship
Planning your renovation or new build
Plan it before we wire it
The best electrical installations start long before the first cable is run. Whether you're renovating or building new, we'll work with you to plan the electrical layout around the way you'll use your home.
From lighting and switching to power, appliances, data and outdoor areas, thinking it through before construction begins helps avoid compromises later.
Every project includes a customised electrical layout tailored to your home. Thinking ahead saves changes later: a well-planned electrical layout helps avoid costly changes during construction and makes sure lighting, power and technology end up where you actually need them.
What does your personalised electrical plan include?
Power point locations
Switch positions
Lighting layouts
Kitchen appliance locations
Feature lighting
Outdoor lighting
TV and data
Future electrical requirements
EV charging provision
By planning everything before construction begins, we help reduce costly changes later and ensure your new home functions exactly as you imagined.
What's included
What can we take care of?
Electrical planning and layout
Data, Wi-Fi and TV cabling
Lighting, switching and dimming
EV charger provision and installation
Power points and USB charging
Exterior and landscape lighting
Kitchen and appliance connections
Heating and ventilation connections
Bathroom electrical and ventilation
Future electrical provision
Switchboard and circuit requirements
Electrical certification on completion
Our renovation process
How do you work ahead to keep the project moving?
A renovation or new build involves multiple trades working to a tight schedule, so good planning and communication are essential.
At Electrical Plus, we think ahead. Where practical, we'll pre-wire or prepare future stages while walls and ceilings are open, helping avoid unnecessary return visits and delays later in the project.
We also clearly label cabling and keep track of what's been allowed for, so the installation remains organised from pre-wire through to final fit-off.
How we keep a project organised
- Keep you informed Clear communication throughout the job so you know what's happening and what's coming next.
- Check plans before we start We review layouts, lighting, power and equipment requirements early to avoid changes later.
- Keep the project moving We plan ahead so when it's time for final fit-off, we're organised, efficient and in and out without holding up the project.
- Plan for what's coming next Allow for future stages while walls and ceilings are still open.
- Label everything Clear identification makes final fit-off and future work easier.
- Coordinate with other trades Electrical work happens when it needs to, without holding up the project.
Why homeowners and builders choose Electrical Plus
Experience that keeps the project moving
- 30+ years of experienceDecades of hands-on experience across renovations, new builds and complex residential electrical projects.
- Planning and communicationClear communication with homeowners, builders and other trades from planning through to final fit-off.
- Work we stand behindRegistered electricians, quality workmanship and electrical work completed to current New Zealand standards, backed by our Lifetime Workmanship Warranty.
Recent work
Electrical that works with the way you live
Good electrical planning should feel almost invisible when the home is finished, lighting where you need it, power in the right places and technology integrated without compromising the design.
Detail
Pre-wire, fit-off and certification
A new build or a substantial renovation splits into two electrical visits. Pre-wire happens while the framing is exposed: cables are run, boxes are fixed at the planned heights, and the switchboard is prepared. Final fit-off happens after the painters have finished, when the switches, outlets and light fittings go on and the whole installation is tested before handover.
All of it is carried out to AS/NZS 3000, the wiring standard New Zealand electrical work is done to. All work is carried out by, or supervised by, Registered Electricians. Electrical Plus is led by Andrew Baker, a Registered Electrician with over 30 years of experience, registered with the Electrical Workers Registration Board. Every qualifying installation is completed with the appropriate Electrical Compliance Certificate and backed by our Lifetime Workmanship Warranty.
Yes. We regularly work alongside builders, architects, kitchen companies and project managers to ensure the electrical work is completed at the right stage. Clear communication and careful scheduling help keep your project running smoothly.
Absolutely. We work with you before construction begins to create a practical electrical layout tailored to the way you live. We'll provide ideas and advice on lighting, power points, switches, TV and data points, EV charging, USB outlets and future-proofing so everything is in the right place before the walls are lined.
Prewire is completed before the walls are lined and includes running cables, positioning power points, switches and lighting, and preparing the switchboard. Final fit-off happens once painting is complete and involves installing switches, power points, light fittings and testing the entire installation before handover.
Every cable is labelled and photographed before plasterboard is installed. This creates a permanent record of your wiring, making future renovations, fault finding and additions much easier without unnecessary damage to your walls. It's one of the ways we work ahead to deliver a smoother, more organised project.
Yes. This is one of the areas where we add the most value. With over 30 years of experience, we can suggest practical improvements that make your home more functional, improve lighting, reduce future alterations and help future-proof your electrical installation.
We supply and install a wide range of switch and power point styles to suit every home, from classic white finishes through to modern architectural designs. Popular ranges include PDL Iconic, PDL 600 Series, Excel Life and Vynco Home, with options available in a variety of colours and finishes. If you're unsure which style best suits your home, we'll happily bring sample plates to your consultation and help you choose the right option to complement your renovation or new build.
Yes, every qualifying installation includes the appropriate Electrical Compliance Certificate on completion.
Where we work
Where we do renovations & new builds
Based in the East Coast Bays, we work throughout Auckland from Greenlane to Mangawhai.
Where we do this work
- Browns BayBase
- Mairangi Bay
- Rothesay Bay
- Campbells Bay
- Castor Bay
- Long Bay
- Albany
- Takapuna
- Milford
- Devonport
- Coatesville
- Riverhead
- Silverdale
- Orewa
- Warkworth
- Mangawhai
Not on the list? Give us a call, we cover a good deal more of Auckland than we can fit here.
“Electrical Plus Limited worked alongside us on a client’s home renovation in Warkworth, and they were awesome to deal with from start to finish. Andy was reliable, easy to communicate with, and worked in perfectly with our team and the other trades on site. His workmanship was top notch, and he made the whole process easy. Also, any electrician who picks up a broom and leaves the worksite spotless is one you definitely don’t want to lose. Would happily recommend Andy and Electrical Plus Limited to anyone needing quality electrical work.”
“Andy and the EP team completed all electrical, lighting, AV, and security work on our full house renovation to the highest standard. Punctual, thoughtful, and conscientious, with acute attention to detail and future-proofing, highlighting their experience. Most importantly, great communication for any project, large or small. Highly recommend.”
“Andy did a great job of getting our new cooker and kitchen wired up. Great service and communication. Highly recommended.”
Related services
Other things we do
Get in touch
Ready to start your renovation or new build?
Send us your plans or tell us about your project. We'll take a look and get back to you to discuss the next steps.
- Free quotes
- Lifetime workmanship warranty
- EWRB registered